Dryer Timers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Dryer Timers
Your Price
$129.54
In Stock
Dryer Timer
PartSelect Number PS11749831
Manufacturer Part Number WPW10185982
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
Eugene from CRUGER, MS
Your Price
$93.70
In Stock
Dryer Timer
Took a picture with cellphone. Took off old timer secured with one screw. All wires still attached at this point.Pulled off about 5 or 6 connectors one by one. Took off first connection and replaced that first connection to new
timer. Took off second connection and put that connection on new timer.
I followed this same pattern until all wires were replaced one at a time-to the timer.
The picture was just for reference. Put metal timer back on with screw.
I did learn whenever replacing a timer also replace the knob connected to the timer i.e. the circular part turned with your hand. Read more...
PartSelect Number PS11763067
Manufacturer Part Number WE04X25280
This timer is a genuine OEM part supplied by the manufacturer for use in dryers. It is a high-quality replacement part that is designed to fit just like the original for your convenience. The timer controls the length of each cycle, such as drying, cooling, or tumbling by activating and deactivating various components of the dryer according to the cycle settings. If you are experiencing issues such as cycles not completing, difficulties starting the dryer,and damp clothing at the end of a cycle, then the timer is likely malfunctioning and will need to be replaced. The timer is located inside the control panel of the dryer.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
BILL from DOVER, DE
Dryer timer spun around therefore dryer would not start.
PULL PLUG ON DRYER. Took off upper back panel with adj. wrench.Took a picture with cellphone. Took off old timer secured with one screw. All wires still attached at this point.Pulled off about 5 or 6 connectors one by one. Took off first connection and replaced that first connection to new
timer. Took off second connection and put that connection on new timer.
I followed this same pattern until all wires were replaced one at a time-to the timer.
The picture was just for reference. Put metal timer back on with screw.
I did learn whenever replacing a timer also replace the knob connected to the timer i.e. the circular part turned with your hand. Read more...
Your Price
$101.33
In Stock
Dryer Timer
PartSelect Number PS11763064
Manufacturer Part Number WE04X24550
This dryer timer is an authentic OEM replacement part for dryers. It is responsible for controlling the duration of the drying cycles to ensure that clothes are dried efficiently. Over time the timer may fail due to regular wear tear, electrical failure, or physical damage to the timer itself. If you notice that the dryer is unable to start or complete a drying cycle or runs longer or shorter than programmed then this is a sign that that timer is malfunctioning. You may also notice difficulties turning the timer knob. You can find the timer behind the control panel of your dryer.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
Charles from WALHALLA, SC
timer control locked down, knob was broken trying to turn
took 6 screws 0ut of cover plate,removed wires one at a time and replaced on new part(timer) removed retaining scres turned 1/4 turn removed--replaced in reverse manner
Read more...
Your Price
$105.68
In Stock
Dryer Timer
PartSelect Number PS8746223
Manufacturer Part Number WE4M532
This timer is supplied directly by the manufacturer for use in dryers. It controls the duration of the drying cycle, and it regulates the various stages of the drying process, such as the drying time, cooldown period, and when to stop the cycle. It has a series of cams or switches that engage and disengage different dryer functions. If the dryer timer is faulty, the dryer may fail to start, or advance through the drying cycle, stop midcycle, or run indefinitely. Additionally, the timer knob may become loose or difficult to turn, or the timer may make unusual clicking or buzzing noises. If you notice any of these signs, you should replace the timer.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
McKinley from Meraux, LA
the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.
Read more...
Your Price
$107.29
In Stock
Dryer Timer
PartSelect Number PS11756913
Manufacturer Part Number WPW10642928
This timer is for dryers.
The timer controls the electrical components and the duration of the dryer cycles.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
randy from KLAMATH FALLS, OR
Your Price
$87.92
In Stock
Dryer Timer
PartSelect Number PS11759041
Manufacturer Part Number WE04X24551
The genuine OEM timer is specially designed to fit with your dryer by the original manufacturer. The timer is responsible for controlling the length of the various dryer cycles such as drying and tumbling. It contains cams or switches that activate and deactivate different dryer functions. If the dryer timer is damaged or experiencing an electrical fault, the dryer may be unable to start, or it may stop in the middle of a cycle, leaving you with damp clothes. If the timer is malfunctioning you may also have difficulties turning the timer knob on the dryer control panel.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
Jerry from ST JOHNS, FL
Dryer timer very hard to turn resulting in a stripped knob
My GE electric dryer timer became very difficult to turn and eventually stripped the knob. First I unplugged the dryer. Then removed the upper back panel exposing the timer. There is only one small allen screw plus built in slots holding the timer. There are many wires connected to the timer so I took a picture just in case. I removed the timer and let it hang by the wires. I then pulled one wire at a time and reattached it to the new timer. All went well and the dryer works like it was new again. The most difficult thing was replacing the small screw holding the timer. I then replaced the back panel and attached the new knob. There’s no need for a professional repair person for this problem. From start to finish was less than 30 minutes.
Read more...
Your Price
$134.46
In Stock
Dryer Timer
PartSelect Number PS11731366
Manufacturer Part Number W10857612
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
Gwendolyn from BAKER, LA
My Dryer Timer broke off at the plastic part.
My son took the timer hood off with a Phillips, head screwdriver and replace the Timer. Then he put. Tim hood back on the dryer.
Read more...
Your Price
$111.92
In Stock
Dryer Timer
PartSelect Number PS8690648
Manufacturer Part Number WE4M533
This is a genuine OEM replacement timer (60Hz) for your dryer. To complete this repair you will need a #2 Phillips screwdriver. To access the timer, you will need to remove the top of the back panel. Disconnect the wires to the timer terminals, remove the timer knob, and unclip the timer from its metal tab. Replace with the new timer and reassemble the wires and remaining parts. Make sure to disconnect power to the dryer before beginning this repair.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
Whitney from Vancouver, WA
START knob and plastic underneath broken
It was so incredibly simple! The site made it foolproof to find the right parts - and the actual replacement job itself was easier than we ever could have imagined. Background: I love to do laundry - I mean A LOT! So - I use the washer and dryer every night to wash the familie's clothing and blankets and towels. After heavy use - the outer knob stripped out. We threw it away and were using pliers to turn the small plastic knob underneath. After a few months - that plastic wore down and we could not turn it on at all!
Read more...
Your Price
$78.46
In Stock
Dryer Timer
PartSelect Number PS9491767
Manufacturer Part Number WE04X20415
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
Installation Instructions
Jeffery from Waterford, MI
Timer knob cracked twice. Found out the timer switch was bad.
Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted on the plastic panel. There should be 2 small pieces of plastic that holds it in. Carefully twist the switch in the appropriate direction so it comes free. Before you remove any wires from the old switch remember what colors go where ! I used needle nose pliers to remove the connections from the switch. Make the new connections, mount the switch, put the screws back in the panel. BEFORE YOU DO ANYTHING. UNPLUG THE ELECTRICAL CORD !!!
Read more...
Your Price
$148.32
In Stock
Dryer Timer
2. Tilt top panel forward and disengage
3. Swapped wiring one by one from old timer to new timer
4. Reinstall
The new timer worked so well that even the old, broken knobs could turn it. But I replaced the knobs anyway.
Customer service was great in helping me verify that this timer would work on this dryer (my model number was not listed on the website). Read more...
PartSelect Number PS3654187
Manufacturer Part Number WE4M527
This is a timer for various models of dryer. The timer within your dryer is responsible for the length of the drying cycle. If your current dryer timer does not turn or rotate well, or if its position makes no difference on the length of the cycle, it will need to be replaced. To replace this timer, you will need a screwdriver and set of needle-nose pliers. This timer is an OEM part and does not come with any other parts, such as the knob or dial that attaches to it, so consider that before ordering.
Installation Instructions
Bruce from South San Francisco, CA
Frozen timer
1. Remove three screws from back of dryer2. Tilt top panel forward and disengage
3. Swapped wiring one by one from old timer to new timer
4. Reinstall
The new timer worked so well that even the old, broken knobs could turn it. But I replaced the knobs anyway.
Customer service was great in helping me verify that this timer would work on this dryer (my model number was not listed on the website). Read more...
