Whirlpool Range Cooktops

Your Price

$312.10

Whirlpool Range Cartridge 4 Spades - Stainless Steel

★★★★★

1 Review

PartSelect Number PS8769936

Manufacturer Part Number JEA7000ADSA

This part has an end plug in.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Laurel from Houma, LA

I have a 26 year old stove top and the electric coils heated intermittantly. I got tired of banging on them to get them to work. I went to various local stores ( Lowe's, appliance stores) and the parts would have been twice the cost and taken a while to come in. I then googled your site and found

I popped out the old burner cartridges and gladly threw them away and popped in the new ones. They work great and no banging! I changed out the old grease filter in the down draft and put the new grill grate on top of the grill in seconds. The timer knob fit well but the burner knobs did not so I had to return those. My "new" stove top looks basically the same except new. The grill grate being black updates the look somewhat. The best thing is that the burners work. Thanks for everything. Read more...

Your Price

$391.80

Whirlpool Range Main Top

PartSelect Number PS11727738

Manufacturer Part Number W10814036

The main top provides a stable cooking surface and houses the surface cooking burners.

Your Price

$402.35

Whirlpool Range COOKTOP

PartSelect Number PS11769620

Manufacturer Part Number W10906141

Your Price

$397.02

Whirlpool Range Cooktop - Black

★★★★★

1 Review

PartSelect Number PS11765482

Manufacturer Part Number W10877558

Your Price

$755.88

Whirlpool Range COOKTOP

★★★★★

1 Review

PartSelect Number PS11727733

Manufacturer Part Number W10813359

Installation Instructions

Gary from BEND, OR

dropped a crock pot glass lid onto the glass cooktop cracking the glass

I slid the range out only a couple of inches so I didn't have to detach the downdraft blower connection. Undoing the four #2 square head screws was easy from the under the control panel as well as the three pairs of screws holding the front of the glass cooktop frame. Undoing the two in the rear (one on each side) was a bit of a challenge in that they were in upside down and difficult to see without a mirror. It was easy to drop the screws as they fell never to be seen again. After they were removed the top was easily removed. Reinstalling the back two screws was the most difficult of the entire procedure. I replaced the #2 square head bits with the same size hex head screws. Using a nut driver made the whole process much easier. By the way, the distance between the holes in the rear and the replacement top is 1/8" difference that made lining up the holes a frustrating experience. I ended up using a rattail file to hog out the opening to enlarge the holes. That made the lineup much much more easy. Read more...