Whirlpool Dishwasher Wheels and Rollers

Videos!

Your Price

$46.04

Whirlpool Dishwasher Lower Dishrack Wheel

★★★★★

331 Reviews

PartSelect Number PS3406971

Manufacturer Part Number W10195416

This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

Thomas from WEST OLIVE, MI

Broken wheel unit on the bottom dish rack

All you do is pop out the old wheel unit at two (2) points on the plastic wheel housing and pop in the new one. Easy fix. Less than a 5 minute fix. Read more...

Your Price

$36.73

Whirlpool Dishwasher Lower Dishrack Wheel Assembly

★★★★★

109 Reviews

PartSelect Number PS11750057

Manufacturer Part Number WPW10195417

This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.

Fixes these symptoms

Door latch failure
Door won’t close
See more...

Installation Instructions

Barbara from BETHESDA, MD

One of the rollers broke of on the lower dish rack

Snapped the old one off and snapped the new one on. Read more...

Your Price

$28.96

Whirlpool Dishwasher Dishrack Adjuster and Wheel Assembly

★★★★★

10 Reviews

PartSelect Number PS11756470

Manufacturer Part Number WPW10571738

This dishrack adjuster and wheel assembly is for dishwashers and lets you adjust the dishrack height and attaches the track wheels to the dishrack.

Installation Instructions

Michael from NEW PRT RCHY, FL

Wheel missing left front of upper rack

Watched video at parts select to remove front, stops, then for wheel assembly after fumbling with wheel assembly to figure where to put pressure on wheel assembly release catch .......reverse assemble.....
Finish. Relax and ponder how parts are designed to fail then easily replace- saving maint and service charges. Had machine 5 years and replace a different failed part once a year so far . Seems a fairly good system as long as parts available. Read more...

Videos!

Your Price

$11.10

Whirlpool Dishwasher Rack Adjuster

★★★★★

32 Reviews

PartSelect Number PS11750255

Manufacturer Part Number WPW10204131

This OEM dishrack roller and adjuster is found in your dishwasher. They work together to support and facilitate the smooth movement of your dishrack. The dishrack rollers are small wheels located on the sides of the dishrack and allow it to slide in and out effortlessly. Meanwhile, the dishrack adjuster is used to adjust the height via the selector at the back of this component. Over time, the rollers wear out. You may experience resistance or difficulty when sliding the dishrack in or out. If left unreplaced, your rollers or adjuster may break, causing dishes to tilt, collide, or fall over during the wash cycle. When removing a roller and adjuster from your appliance, you will need to pull out the dishrack partway. Detach the assembly by depressing the tabs on the two end stops before lifting them up. Keep in mind that the roller and adjuster are sold together, but the dishrack itself is sold separately.

Installation Instructions

Randy from Glenview, IL

Replacement of broken Rack Assembly Mount with Wheel

The only piece that may be a little difficult to remove here without a tool is the 'Track Stop'. This piece has a couple of clip-like pieces that need to be depressed in order to remove it. A flathead screw driver will do the trick. Once this piece is out and you have popped the Mount off of the Rack, you simply roll the piece out of the track, roll the new one in and snap the new Mount in place, replacing the Track Stop when you are done. VERY EASY! Read more...

Videos!

Your Price

$11.30

Whirlpool Dishwasher Upper Rack Wheel and Mount Assembly

★★★★★

12 Reviews

PartSelect Number PS11745525

Manufacturer Part Number WP8270019

Sold Individually.

Fixes these symptoms

Not cleaning dishes properly
See more...

Installation Instructions

Kevin from Hurst, TX

top dw rack fell off of rollers

Amazingly, this not-too-old dishwasher's plastic parts that hold the top rack onto the sliders became brittle (a real design flaw, in my opinion) and the tabs that held the rollers in place all broke off. With the right parts and the great instructions on this site, the repair was fairly easy and we saved a lot of $$ by not having to call for service. Just follow the instructions... Read more...

Your Price

$29.90

Whirlpool Dishwasher Upper Dish Rack Wheel Mount

★★★★★

62 Reviews

PartSelect Number PS11745459

Manufacturer Part Number WP8268743

This upper dish rack wheel mount can be used on either side of your dish rack. It is sold individually. The part includes the wheel and support, which attaches to the dish rack and allows it to slide in and out easily.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Installation Instructions

Jason from Todd, NC

Worn dishrack wheel mount

This wheel mount broke from normal use and made the upper dish rack disconnect from the sliding arm that extends it outside the dishwasher body so that you can fill it. The part was delivered quickly and was easy to install using just a screwdriver to loosen the retainer clip on the end of the extension slide. Once the retainer clip was removed, the new part was slid into place and clipped onto the rack. The install was complete. Read more...

Videos!

Your Price

$29.38

Whirlpool Dishwasher Upper Rack Wheel with Mount

★★★★★

57 Reviews

PartSelect Number PS11745451

Manufacturer Part Number WP8268655

This is a replacement upper dish rack wheel with mount for your dishwasher. The mount supports the dish rack, and the wheel allows the rack to slide out easily. To replace this part, remove the rack stops and pull out the upper dish rack. This wheel mount pops off, and the new one can be snapped into place.

Fixes these symptoms

Door latch failure
Door won’t close
Noisy
See more...

Installation Instructions

James from Gulfport, MS

The wheels on the upper dish rack broke

I removed the end caps on the slides with needle nose pliers, removed the old wheels and installed the new ones, then I snapped the slide end caps back on. Super responsive service from PartSelect.com Thanks! Read more...

Your Price

$42.40

Whirlpool Dishwasher Upper Rack Roller

★★★★★

27 Reviews

PartSelect Number PS11753471

Manufacturer Part Number WPW10350401

This assembly is the wheel and the mount for your upper dishrack. Sold individually. This is an authentic OEM part for use with Whirlpool, KitchenAid, Kenmore and Jenn-Air Dishwashers. The dishrack wheel lets you roll the rack easily on the support rails. This part is sold individually. The most common reason for replacing the dishrack wheel is if it breaks causing the rack to jam. The tool that you will need to replace the dishrack wheel is a flathead screwdriver.

Fixes these symptoms