Models
>
R1501
R1501 Sharp Microwave - Overview
Sections of the R1501
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Glass Tray Support
PartSelect #: PS12700223
Manufacturer #: FROLPA117WRKZ
Glass tray support
No Longer Available
Hardware Kit
PartSelect #: PS12675333
Manufacturer #: CFZKB460MRK0
Mounting hardware kit
No Longer Available
Glass Tray
PartSelect #: PS12681581
Manufacturer #: NTNTA108WREZ
Glass cooking tray
No Longer Available
Charcoal Filter
PartSelect #: PS12690905
Manufacturer #: PFILB006MRE0
Charcoal filter
No Longer Available
Grease Filter
PartSelect #: PS12668774
Manufacturer #: PFILB002MRE0
Grease filter
No Longer Available
Questions And Answers for R1501
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lcd Went Out On Control Panel
Step 1. Remove 3 screws holding above vent. Step 2. Remove single screw holding right side panel. Step 3. Unplug unit step 4. Lower panel. Will rest on lower pegs and wires. Step 5. Unplug control panel assembly. 5 Plugs. Remember location of each to replace when finished. Step 6. Remove entire panel carefully not to
... Read more
break off plastic teets holding panel in place. Step 7. Unscrew 4 screws whith phillips screwdriver holding panel assembly in place remembering how it goes. Step 8. Unfasten/plug lcd portion from control panel assembly. Step 9. Snap out lcd glass panel and remove entire unit. Step 10. Reverse each step in order. Be prepared to take your time and handle gently with care! Its not very difficult if you take your time, write down steps and draw diagrams if necessary. You can save alot of money by doing it yourself!
Read less
Parts Used:
-
David from Whitewater, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!