The drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This ...
$44.96
In Stock
Order within the next 11 hrs and your part ships today!
This is a thermistor, also known as a dryer thermistor. The thermistor is attached to the blower housing, it will help regulate and oversee the temperature within the dryer. The most common symptom of...
$35.60
In Stock
Order within the next 11 hrs and your part ships today!
This idler pulley assembly is sourced from the original manufacturer for use in dryers. The assembly includes the pulley wheel and bracket. It is found near the motor where it provides tension to the ...
$62.79
In Stock
Order within the next 11 hrs and your part ships today!
This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does not heat or over heats, or clothes take too long to dry, ...
$153.40
In Stock
Order within the next 11 hrs and your part ships today!
The drum support roller and axle, which includes the roller shaft and mounting clips, is used in dryers. This part holds the drum as it rotates on the support wheels. When the roller begins to wear ou...
$41.88
In Stock
Order within the next 11 hrs and your part ships today!
This thermostat is a genuine OEM part and is manufacturer-approved for electric dryers. The thermostat is responsible for monitoring and maintaining the temperature inside the dryer during the drying ...
$25.33
In Stock
Order within the next 11 hrs and your part ships today!
The thermal fuse measures the air temperature inside your dryer drum, and turns the heat on and off to maintain the optimal temperature during the drying cycle. If your dryer will not start, dry cloth...
$51.02
In Stock
Order within the next 11 hrs and your part ships today!
This genuine OEM heater duct assembly in your dryer directs hot air into the drum during operation. Generally, it can be found behind the drum or at the rear of the dryer. If this assembly becomes dam...
$288.97
In Stock
Order within the next 11 hrs and your part ships today!
This moisture sensor plate is specifically designed to fit with your Samsung dryer. It is made of stainless steel and measures approximately 5 inches long. It is designed to detect the amount of moist...
$19.33
In Stock
Order within the next 11 hrs and your part ships today!
The high limit thermostat is designed for use in your dryer. The function of this part is to make sure that your dryer does not get too hot. If your dryer is not regulating heat properly, you may need...
This lint screen case, or lint filter case is specially designed for Samsung dryers. It is responsible for securing the lint screen inside the lint screen housing and preventing it from falling out. T...
$45.78
In Stock
Order within the next 11 hrs and your part ships today!
Order within the next 11 hrs and your part ships today!
Questions And Answers for DV45H7000EW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
December 2, 2019
Need the power and start buttons extremely hard sometimes with a tool to work time drying buttons will not adjust time
For model number DV45H7000EW
Hello Dennis, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS9606282. Hope this helps!
When dryer is in timed dry it shuts down in about a minute
For model number DV45H7000EW
Hi Steve,
Thank you for your question. If the dryer is shutting off too soon, there are some parts that you will need to check to see which one is causing the issue. You will need to check the thermistor, the moisture sensor and the thermal fuse. You will need to test the parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
EDWARD
November 30, 2022
DRYER QUITE HEATING
For model number DV45H7000EW
Hello Edward, thank you for the question. According to our research, we would recommend checking the following parts to fix your issue: thermistor, part number PS4204984, thermal fuse, part number PS4205213, and heating element, part number PS4205218. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
Tumbler continues to run after drying cycle is complete and when machine is turned off
For model number DV45H7000EW
Hello Mike, thank you for the question. We recommend you check your door switch. A faulty door switch can cause the issue. Use a multimeter to check it for continuity. If the door switch, part number PS4210965, fails the continuity test replace it. If the door switch is okay, you may need to replace the control board, part number PS9605978. We hope this solves your problem!
YouTube, YouTube, YouTube. I YouTubed many videos on how to take a dryer apart to reach the drum support roller and axle. After watching numerous videos, I settled on one that had my exact model of dryer. For my dryer, previous inputs said I needed two rollers to for my model. That is not the case. My model actually has 4 rollers, 2 in th
... Read moree front and two in the back. I ordered 2 initially but only needed 1 thankfully since only one roller was bad. Keep it simple stupid is how I got it done. Dryer's are pretty simple machines mechanically. Don't trash your noisy dryer. We bought ours in 2014 and it only recently started giving us issues. This is after 2 moves and being run daily for a family of 6. I'm glad I found partselect.com. They saved me a ton of money.
Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again