Maytag Washer Dryer Combo Switches

Videos!

Your Price

$34.76

Maytag Washer Dryer Combo Dryer Door Switch

★★★★★

468 Reviews

PartSelect Number PS11741701

Manufacturer Part Number WP3406107

This dryer door switch is a simple on/off switch mechanism that prohibits the dryer from operating when the door is open, and operates the drum light. White in color and 6.5 inches long, this OEM switch is comprised of plastic and metal, and features the switch and three wires that comprise the part. Sold individually, this part attaches to the inside of the top end of the front panel. One end attaches to the wiring harness, the other goes through the panel to make contact with the door when the door is closed. Over time, this part can be subject to material fatigue or breakage due to frequent use or rough handling. If it breaks or is defective, you won't be able to start or stop your drying cycle, depending on the position your switch broke in. The easiest way to test this part for functionality is to test it by hand. Push on the black tab that sticks out of the front panel to make contact with your dryer door; if there is no resistance in the tab and it doesn't make a click sound, you may need to replace it.

Fixes these symptoms

Door won’t close
Light not working
Running With Door Open
See more...

Installation Instructions

pat from lisbon,, OH

door switch was bad

i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service Read more...

Your Price

$55.64

Maytag Washer Dryer Combo Water Level Switch

★★★★★

2 Reviews

PartSelect Number PS11754877

Manufacturer Part Number WPW10448876

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

Fixes these symptoms

Draining Issues
Water Filling Issues
Will not drain
See more...

Installation Instructions

George from ORO VALLEY, AZ

Door locked because of faulty water level switch

First some background. The door locked up the first time when appliance was less than one year old. The "Maytag Repairman" finally succeeded in getting the door open after propping up the front of the machine and fumbling around underneath for a period of time and then assured me the problem was solved. The problem recurred less than a year later, and I called another repairman who seemed to have an easier time of it, and charged $293.42 to replace the water level switch. About six months later the same problem recurred and I took the cover off the top of the machine and found there a booklet "For Service Technician's Use Only". VERY HELPFUL. Told how extremely easy it was to unlock door - took about five seconds. Replacing the switch itself involved pulling one tubing off and disconnecting one elec connection from old switch and replacing on new switch. Total cost $50 plus a few dollars for shipping. Read more...

Videos!

Your Price

$23.74

Maytag Washer Dryer Combo Lid Switch

★★★★★

16 Reviews

PartSelect Number PS11723153

Manufacturer Part Number W10820036

This 3 prong lid switch is used for washing machines that do not have a tub light.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Installation Instructions

Peter from Westbury, NY

washer would not start

To see if the lid switch was the problem I first jumped it out and tried to start the washer. That was the problem. I removed the main controll so I could get to the lid switch. I made the mistake of removing the screws all the way out and the metal clip fell into the body of the washer, no problem since I was changing the drive beld anyway. I realized that you do not remove the screws all the way out, you just have to loosen them and then slide out the lid switch & then replace it. Read more...

Videos!

Your Price

$66.22

Maytag Washer Dryer Combo Push-to-Start Switch

★★★★★

15 Reviews

PartSelect Number PS11748542

Manufacturer Part Number WPW10117655

This switch or push to start switch is used for dryers. It is the tool that completes the circuit and ultimately starts the dryer by pressing and releasing the button after selecting a setting on the timer. The tools needed for this project are a 1/4 inch nut driver, and a flathead screwdriver. To repair, first remove the rear panel and start switch. Next, replace with new start switch and rear panel. Remember to unplug your dryer before beginning this installation and refer to the manual provided by the manufacturer for further installation instructions.

Fixes these symptoms

Won’t Start
See more...

Installation Instructions

Josh from Emory, TX

Push to Start switch burned out due to electrical problem

Unplug from the wall ,remove upper back panel ( watch out for the grounding wire screwed to the panel), pulled off front knob, then twist and pull the switch out. Unplug the burned out switch, plugged in the new one. Re-assembled what I took apart, plugged her up and dried the load that was in the washer. Note: if yours is burned out due to house power surge make sure the timer is working after you replace the switch, you might need one of thoes too. Read more...

Videos!

Your Price

$30.00

Maytag Washer Dryer Combo Door Switch Kit

★★★★★

19 Reviews

PartSelect Number PS1964648

Manufacturer Part Number W10169313

This part replaces two terminal switches in a dryer and prevents the dryer from running when the door is open. This includes two connectors. If your dryer will not shut off, start, or does not tumble, replacing the door switch can solve this appliance problem. The tools needed for replacement are a screw driver and wire strippers. Make sure to attach the two wires to the right two poles of the new switch, to do this you can check the resistance of the switch. Unplug the dryer before installing this part, also refer to the diagram provided by the manufacturer.

Fixes these symptoms

Noisy
Won’t Start
See more...

Installation Instructions

Don from Jacksonville, FL

Switch sticking in on position

FIRST unplug dryer from electrical source, CAUTION, the top of this dryer does not open with clips, do not pry on top to open! On the front of the dryer look under the lower panel, and find two screws, one on the left side, and one on the right, remove these screws, and pull slightly down on panel to remove. Behind this panel find two screws holding the door panel, one on the left, and one on the right, remove the left, and support the door panel while removing the right side. Gently pull the bottom of door panel outward, and the clips on top of door panel will unhinge from top, carefully rotate left side of door panel to floor, and note the wire connections on switch, and orientation of switch, then unplug wires, and move door panel to a comfortable working positon. Door must be open to remove switch, then depress the two plastic retaining keepers on each side of switch, and push switch through toward door. Replace with new switch, reconnect the wires, and reassymble in reverse order. Remember, door assymbly must be inserted in dryer top at an angle, and then bottom rotated downward, and bottom panel nylon guildes inserted into door panel bottom. Read more...

Your Price

$51.59

Maytag Washer Dryer Combo Lid Switch Kit

★★★★★

10 Reviews

PartSelect Number PS11741198

Manufacturer Part Number WP3355458

The point of the lid switch is for the tub to stop spinning when the washer lid is opened.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Installation Instructions

Pam from San Diego, CA

Washer stopped before rinse cycle

My husband actually did the repairs all I know is he removed the lid, removed the old switch and put in the new one. My washer works now and thats all I care about. I thank you for having the part and at a reasonable cost we were able to repair our washer considering it is twin stackable and is over 10 years old.
Thanks again!!!! Read more...

Your Price

$44.05

Maytag Washer Dryer Combo Switch, Door

★★★★★

1 Review

PartSelect Number PS11741453

Manufacturer Part Number WP3391902

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Your Price

$48.50

Maytag Washer Dryer Combo Lid Check Switch

★★★★★

9 Reviews

PartSelect Number PS11738787

Manufacturer Part Number WP207166

This lid switch check is used in washers to detect if the washer lid is open or closed. This prevents a cycle from spinning when the lid is still open and is also used to start your washer once a certain water level is reached. If your washer will not start, agitate, drain, or fill with water, replacing the switch can be a solution to the problem. As a safety precaution, remember to unplug your washer from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.

Fixes these symptoms

Will not agitate
Will not drain
Will Not Start
See more...

Installation Instructions

Suleman from Canoga Park, CA

Washer was dead and would not turn on

Well the washer died and would not turn on in the middle of a wash cycle. Absolutely dead. I disconnected it from power and opened up the front panel on which all the control switches and knobs are mounted. This is removed by unscrewing 4 screws at the top of the washer.

Checked the fuse, and found blown. Replaced the fuse, closed the panel and plugged it in. Still not working. Checked the Check switches and found the Check Switch really limp. Checked with Digital Multimeter and found no continuity at either position. Unscrewed the check switch. Removal and re inspection with DMM of the check switch confirmed it was bad. Opened up the check switch and found contacts were blown.

Installed a new check switch making sure all the connecting wires go in the right places. The wiring diagram in the washer was very helpful in doing so since u dont want these wires reversed. Adjusted the plunger which operates the check switches when the lid is opened to make sure it is not over or under operating the switches. This is done by loosening the bolt holding down the check switch assembly and slidint the whole assembly forwards or backwards till the plunger has just enough push on the switches. This is done to avoid the plunger from exerting excessive pressure on the check switch and the safety switch in lid open or lid closed position. (both switches are operated by the same plunger according to the lid position)

Closed panel cover and plugged the washer in. There u go, it was alive again! Read more...