Admiral Washer Switches

Videos!

Your Price

$46.06

Admiral Washer Lid Switch

★★★★★

77 Reviews

PartSelect Number PS11745957

Manufacturer Part Number WP8318084

This part is found in your washer. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the green grounding wire. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. You will need a 5/16-inch nut driver for this repair. The package will contain one lid switch. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch.

Fixes these symptoms

Burning smell
Cycle Not Advancing
Lid or door won’t close
See more...

Installation Instructions

Clint from Kansas City, KS

Washer wouldn't run

I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side. To remove the switch, I first detached the wire to the control panel and unscrewed the grounding wire. The new switch drops right in. I had a little trouble getting it in until I realized the washer lid had to be open. A little awkward but once it's in you can shut the lid and then I reattached the wire from the control panel and screwed in the grounding wire. Pretty easy. $20 for the part (with shipping) and 15 minutes. Way cheaper than a repairman. Read more...

Your Price

$88.10

Admiral Washer Temperature Switch - 4 Positions

★★★★★

3 Reviews

PartSelect Number PS11749784

Manufacturer Part Number WPW10184148

This part regulates the temperature of the water in the tub.

Fixes these symptoms

No hot or cold water
See more...

Installation Instructions

stephen from Coventry, RI

Automatic water temperature switch failed

removed two screws and atc knob. swung control panel out. unplugged atc switch. pushed little tab down and turned the switch. it popped out and I put the new one in. plugged the cable back in. repositioned the control panel. replaced the atc knob and turned it to rinse. Voila!!! it works. Read more...

Your Price

$134.27

Admiral Washer Water Level Pressure Switch

★★★★★

6 Reviews

PartSelect Number PS3408149

Manufacturer Part Number W10339251

This part is located behind the control panel. It helps determine the level of water in the washer. As the water fills the hose, while tub is filling, it will push the air against a diaphragm inside the switch. More water that enters the tub, more pressure is applied against the switch.

Installation Instructions

Chris from LIBERTY TWP, OH

Washer was not filling with water to proper level (was filling some, not enough)

Ordered part PS3408149 from partselect.com. Lifted Washer control panel with putty knife. Removed hinges (regular screwdriver, used as a crowbar rather than screwdriver) holding control panel to washer body. Moved washer body panel out of the way, and reviewed level sensor/level selector switch. Take handle off front of selector switch. Twist selector switch off from inside (90 degree turn till square inset lines up withsquare hole, then it will come out). Insert new selector switch. Remove old tubing. Fish new tubing through where old tubing was. Cut off extra tubing, then push tubing onto selector switch and tub basin (where old tubing was). Put washer back together. Done. Worked perfectly. Read more...

Videos!

Your Price

$134.25

Admiral Washer Water Level Switch

★★★★★

4 Reviews

PartSelect Number PS3408163

Manufacturer Part Number W10339334

This water level switch senses the level of water in the inner tub.

Installation Instructions

Larry from Hyden, KY

Water level switch broke off in the knob.

Unplugged the washer from the power. Turned off the hot and cold water. Took two screws off the back and raised up the upper cover. Took the power cables and water tube loose from the water level switch. Removed the switch. Put the new switch in. Removed two metal clips at the top of the washer and leaned the washer body forward. Replaced the tube with a new one. Put the washer body back in place and put the clips back in. Attached the tube to the new switch along with the power cables. Let the top cover back down and put in the two screws. Slid the new knob in place. Plugged up the washer to the power. Turned the hot and cold water back on. And commenced washing laundry. Read more...

Your Price

$110.89

Admiral Washer Switch, Main Drive Motor

PartSelect Number PS11746107

Manufacturer Part Number WP8529896

Your Price

$106.00

Admiral Washer Water Level Switch

★★★★★

2 Reviews

PartSelect Number PS11750715

Manufacturer Part Number WPW10231403

Videos!

Your Price

$87.63

Admiral Washer Lid Switch Kit

PartSelect Number PS2002890

Manufacturer Part Number 12001187

The lid switch kit is an assembly for replacing your washer lid switch. The function of this part is to detect if your washer lid is open or closed. If it detects that it is open it will prevent the washer from rotating and agitating until it is closed. This kit includes the bracket, actuator, switch, screws, and wire harness. To complete this installation, you will need a number two Phillips screwdriver, and a 5/16 nut driver. Before beginning this repair, make sure the power supply to your washer is disconnected. In order to install this part, you will need access to the rear of the unit.

Fixes these symptoms

Will not drain
Will Not Start
See more...

Installation Instructions

Linda from La Porte, IN

Intermittent problem with lid switch, no high speed spin/pump out

Disconnect power, unsnap and raise machine top cover w/lid, remove old switch - two screws under lid, taking care to not drop loose actuator lever into machine. Remove control panel back and disconnect switch wire connector. Intall new switch, taking care to not drop loose actuator lever into machine, connect switch wires inside control panel. Replace panel cover and lower machine top cover w/lid and snap into place, reconnect power, verify operation... Read more...